Preparative For Installation; Standard Accessory Parts; Selection Of The Installation Location - Gree Free match GKH 12 BB-K6DNA3A/I Mode D'emploi

DC Inverter Free match Series Cassette Type Unit

4 Preparative for Installation

4.1 Standard Accessory Parts

The standard accessory parts listed below are furnished and should be used as required.
No. Name
1 Drain Hose
2 Nut with Washer
3 Washer
4 installation paperboard
5 Gasket mounting board
Wireless Controller
6
+Battery
7 sealing plaster
8 Fastener
9 Insulation
10 Insulation
11 Sponge
12 Nut
13 Nut
14 Enswathement

4.2 Selection of the Installation Location

otherwise the unit would topple or fall off.
① . Do not install where there is the danger of combustible gas leakage.
② .
③ . Children under 10 years old must be supervised not to operate the unit.
Decide the installation location with the customer as follows:
Table 1
Indoor Unit Accessories
Appearance
WARNING!
CAUTION!
11
Q'ty Usage
To connect with the hard PVC drain
1
pipe
4
unit.
To be used together with the
10
hanger bolt for installing the unit.
1 used for ceiling drilling
Used to prevent gasket from falling
4
off
1+2 To control the indoor unit
1
4 To fasten the sponge
1 To insulate the gas pipe
1 To insulate the liquid pipe
4 To insulate the drain pipe
1 To connect gas pipe
1 To connect liquid pipe
2
,