FoodSaver VS1192X Guide De Référence page 5

Masquer les pouces Voir aussi pour VS1192X:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 7
Features of your Handheld
Vacuum System
Vacuum Button
A
Charging Indicator Light
B
Ergonomic Design
C
Reservoir (Removable for easy cleaning)
D
Charging Contacts
E
Accessory Port
F
Charging Dock
G
VS1192X_19MLM1(EMEA).indd 4
Care, Cleaning &
Troubleshooting
Care & Cleaning
1. Always unplug appliance before cleaning.
A
2. Do not immerse the charging dock, power cord and charger or
the Handheld Vacuum Sealer in water or any other liquid.
3. Avoid using abrasive products or materials to clean any
B
appliance components. These cleaners can scratch the surface
and damage the black foam rubber pads.
4. Use a mild dish washing soap and a warm, damp cloth to wipe
away food residue inside or around components.
C
5. Empty Reservoir after each use. Wash in warm soapy water. Air
dry before replacing.
IMPORTANT:
To remove Reservoir from FoodSaver
Vacuum Sealer with one hand pull clear Reservoir away from
D
main housing of unit.
The FoodSaver
only (in the refrigerator or cupboard) and not in the freezer. Do not
use to vacuum seal liquids.
If vacuuming moist foods, ensure that the liquid does not reach
the zipper bag valve and check and clean the appliance reservoir
when needed.
FoodSaver
1. The Container Base and Lid can be safely washed in the top
rack of the dishwasher. You can also wash both pieces in
E
warm, soapy water; rinse well and dry thoroughly. The Vacuum
Valve Cover and Gasket can be washed in warm, soapy water;
rinse well and dry thoroughly.
2. FoodSaver
F
not for cooking.
Troubleshooting
Vacuum sealer does not start when start Button is
pressed:
1. Ensure vacuum sealer is charged.
G
Vacuum Sealer starts but bag does not tighten
around food:
1. Ensure zipper is firmly closed. Slide fingers across entire zipper.
2. Air valve is not on flat surface. Reposition bag so the Air Valve
lies flat on counter with no food under Air Valve.
Vacuum Nozzle and Air Valve are not making secure
contact:
1. Ensure Vacuum Nozzle is centred over the grey circle and
placed flat on Air Valve. Apply moderate pressure.
Air was removed from the bag, but now air has re-entered:
1. Examine zipper and valve of bag. Food debris in zipper or
valve may cause leakage and allow air to enter.
2. Sometimes moisture or food material along seal edges of the
zipper or beneath the valve prevents bag from sealing properly.
Wipe the inside of bag around zipper and beneath value and
attempt to reseal.
3. If you are vacuum packaging sharp food items, bag may have
been punctured. Use a new bag if there is a hole. Cover sharp
food items with a soft cushioning material, such as a paper
towel, and reseal.
The FoodSaver
1. Ensure the gasket on inside of lid is free from food and debris.
Remove the valve cover and check to see if there is any debris
in the valve. Clean the valve thoroughly periodically after usage.
Ensure lid is firmly pressed down onto the base tray.
-4-
: while holding Handheld
®
Fresh Zipper Bags should be used for fresh storage
®
Fresh Containers
®
Containers are microwave safe for reheating only,
®
Fresh Container will not vacuum:
®
English
4/24/19 2:22 PM

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Fsv1192

Table des Matières