Nilfisk SCRUBTEC R 466 Instructions D'utilisation page 79

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Solution/clean water tank filling
NOTE
If the machine is equipped with Chemical Mixing System (optional) the tank must be filled with clean water, otherwise the
tank must be filled with solution.
CAUTION!
Use only low-foam and non-flammable detergents, intended for automatic scrubber applications.
WARNING!
When using floor cleaning detergents, follow the instructions on the labels of the detergent bottles.
To handle floor cleaning detergents, wear suitable gloves and protections.
1.
Open the filler neck (23).
2.
(For machines without Chemical Mixing System)
Fill the tank (22) with a solution suitable for the work to be performed.
Do not fill the tank (22) completely, leave a few inches from the edge of the filler neck (23).
Always follow the dilution instructions on the label of the chemical product used to prepare the solution.
The solution temperature must not exceed 40 °C.
(For machines with Chemical Mixing System)
Fill the tank (22) with clean water.
Do not fill the tank (22) completely, leave a few inches from the edge of the filler neck (23).
The water temperature must not exceed 40 °C.
Detergent tank replacement (for machines with Chemical Mixing System)
1.
Open the cover (20) and check that the recovery tank (19) is empty, otherwise empty it with the drain hose (24).
2.
Close the cover (20).
3.
Carefully lift the tank assembly (44).
4.
Open the detergent tank plug (42).
5.
Remove the empty container and replace it with a new one.
6.
Insert the hose properly and screw down the plug on the detergent tank.
NOTE
If the detergent tank is empty (in case of new system, system emptied for cleaning, etc.), in order to fill the hose quickly,
it may be useful to drain the Chemical Mixing System once or several times (see the procedure in Maintenance chapter).
Driver's position adjustment
1.
Using the lever (73), adjust the height of the steering wheel (1) to reach a comfortable position.
9098960000(2)04/2016 A
SCRUBTEC R 466 - R 471 - R 471C - BOOST
USER MANUAL
R4
®
ENGLISH
17

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Scrubtec r 471Scrubtec r 471cScrubtec boost r4908727002090872710209087272020 ... Afficher tout

Table des Matières