Rockwell Automation Allen-Bradley 931S-A2A5N-OP Notice D'utilisation page 7

7. Accessories
Marker
ATEX - Approval
UL DEMKO 09 ATEX 0929065X
T II 3G Ex nA IIC T4
WARNING WARNING
UL Class 1, Division 2 Markings
for selected Signal Conditioners
A. "This equipment is suitable for use in Class I, Division 2, Groups A, B,
C and D hazardous locations or nonhazardous locations only or the
equivalent."
B. "WARNING: EXPLOSION HAZARD - Substitution of components may
impair suitability for use in Class I, Division 2 environments."
C. "WARNING: EXPLOSION HAZARD - The area must be known to be
nonhazardous before servicing/replacing the unit and before installing
or removing I/O wiring."
D. "WARNING: EXPLOSION HAZARD - Do Not disconnect equipment
unless power has been disconnected and the area is known to be
nonhazardous."
Cat. No.
1492-M5X10
Rockwell Automation
1201South Second Street
Milwaukee, Wi 53204
U.S.A.
5