Télécharger Imprimer la page

Rockwell Automation Allen-Bradley 931S-A2A5N-OP Notice D'utilisation page 3

Publicité

Les langues disponibles

Les langues disponibles

1.
General instructions
WARNING
WARNING
• Disconnect power prior to installation
• Installation only by Qualified personnel
• Follow all applicable local and national electrical codes
For applications with high isolation voltages, take measures to prevent
accidental contact and make sure that there is sufficient distance or
insulation between adjacent devices!
Appropriate safety measures against electrostatic discharge
(ESD) should be taken during assembly and adjustment work on
the 931S-A2A5N-OP.
2.
Application
The Passive Isolator Splitter 931S-A2A5N-OP is used for the galvanic
isolation and conditioning of current signals. Input signals and output
signals are permanently calibrated and cannot be conditioned.It is not
necessary to adjust the pre-settable measurement ranges.
1

Publicité

loading