JVC KD-R960BTS Manuel D'instructions page 23

AUDIO SETTINGS
PRO EQ (For KD-AR865BTS)
1 USER1/ USER2: Select a preset name.
2 BASS / MID BASS / MID / MID HIGH / HIGH: Select a sound tone.
3 Adjust the sound elements of the selected sound tone.
BASS Frequency: 63/ 80/ 100/ 125 HZ
Level:
Q:
MID BASS Frequency: 200/ 250/ 315/ 400 HZ
Level:
Q:
MID Frequency: 630/ 800 HZ/ 1.0/ 1.25 KHZ (Default: 800 HZ
Level:
Q:
MID HIGH Frequency: 2.0/ 2.5/ 3.15/ 4.0 KHZ
Level:
Q:
HIGH Frequency: 6.3/ 8.0/ 10.0/ 12.5 KHZ
Level:
Q:
AUDIO
BASS BOOST +01 / +02: Selects your preferred bass boost level. ; OFF: Cancels.
LOUD 01 / 02: Boosts low or high frequencies to produce a well-balanced sound at
low volume. ; OFF: Cancels.
SPK-OUT *
6
SUB.W 00 to +06 (+03): Adjusts the output level of the subwoofer
LEVEL *
5 connected via speaker lead. ( 31, 32)
PRE-OUT * 7
–08 to +08 (00): Adjusts the output level of the subwoofer
connected to the lineout terminals (SW or REAR/SW)
through an external amplifier. ( 31, 32)
SUB.W * 7
ON / OFF: Turns on or off the subwoofer output.
SUB.W LPF *
5
THROUGH: All signals are sent to the subwoofer. ; LOW 55HZ / MID 85HZ /
HIGH 120HZ: Audio signals with frequencies lower than 55 Hz/ 85 Hz/
120 Hz are sent to the subwoofer.
( Default: 80 HZ
–10 to +10
Q1.0/ Q1.25/ Q1.5/ Q2.0
(Default: 250 HZ
–10 to +10
Q1.0/ Q1.25/ Q1.5/ Q2.0
–10 to +10
Q0.75/ Q1.0/ Q1.25/ Q2.0
(Default: 2.5 KHZ
–10 to +10
Q0.75/ Q1.0/ Q1.25/ Q2.0
(Default: 8.0 KHZ
–10 to +10
Q0.75/ Q1.0/ Q1.25/ Q2.0
SUB.W PHASE * 5
REVERSE (180°)/ NORMAL (0°): Selects the phase of the subwoofer
output to be in line with the speaker output for optimum performance.
(Selectable only if a setting other than [THROUGH] is selected for
[SUB.W LPF].)
HPF (For KD-AR865BTS)
00
OFF: All signals are sent to the front/rear speakers. ; LOW 100HZ /
Q1.25)
MID 120HZ / HIGH 150HZ: Audio signals with frequencies lower than
100 Hz/ 120 Hz/ 150 Hz are cut off from the front/rear speakers.
00
FADER R06 — F06 (00): Adjusts the front and rear speaker output balance.
Q1.25)
BALANCE *
8
L06 — R06 (00): Adjusts the left and right speaker output balance.
00
VOL ADJUST –05 — +05 (00): Presets the volume adjustment level of each source
Q1.0)
(compared to the FM volume level). Before adjustment, select the source
you want to adjust. ("VOL ADJ FIX" appears if FM is selected.)
00
Q1.0)
AMP GAIN LOW POWER: Limits the maximum volume level to 30. (Select if the
maximum power of each speaker is less than 50 W to prevent damaging
00
the speakers.) ; HIGH POWER: The maximum volume level is 50.
Q1.0)
D.T.EXP ON: Creates realistic sound by compensating the high-frequency
(Digital Track components and restoring the rise-time of the waveform that are lost in
Expander) audio data compression. ; OFF: Cancels.
SPK/PRE OUT Selects the appropriate setting to get the desired output. ( 22).
*
5
Displayed only when [SUB.W] is set to [ON].
*
6 Displayed only when [SPK/PRE OUT] is set to [SUB.W/SUB.W]. ( 22)
*
7
For unit with 3-pair lineout terminals: Displayed only when [SPK/PRE OUT] is set to
[REAR/REAR] or [SUB.W/SUB.W]. ( 22)
For unit with 2-pair lineout terminals: Displayed only when [SPK/PRE OUT] is set to
[REAR/SUB.W] or [SUB.W/SUB.W]. ( 22)
* 8
This adjustment will not affect the subwoofer output.
21
ENGLISH