Technical Specifications - SilverCrest SKM 10 C1 Mode D'emploi Et Consignes De Sécurité

SilverCrest SKM 10 C1
headphones with the components numbered. The
meanings of the numbers are as follows:
1 Ear pad (medium)
2 3.5 mm jack
3 Ear pad (large)
4 Ear pad (small)
The SilverCrest SKM 10 C1 headphones are
available in 7 different designs. The only difference is
the styling of the earphones. Setup, operation, etc. is
identical for all of them. Figure A shows the different
designs available.

Technical specifications

Impedance
Sensitivity
Frequency range
Broadband
characteristics
voltage
Connector
Cable length
42 - English
32 Ohm +/- 4 Ohm
105 dB (A) +/- 10%
at 1 kHz
20 Hz - 20 kHz
approx. 100 mV +/- 20%
3.5 mm jack
approx. 120 cm