FAZUA RIDE 50 TRAIL Notice Originale page 99

Original instructions | English
Keep the drainage opening on the cooling unit clean or clear to ensure that
→
splash water and/or condensate can drain easily from the DRIVEPACK.
To clean the drainage opening, first remove the
BATTERY from the DRIVEPACK (see arrow in Fig.
on right). Then push out the dirt from inside the
DRIVEPACK using a plastic plunger.
IMPORTANT: Always clean the drainage opening
dry; keep moisture away from the BATTERY
interface inside the DRIVEPACK and take care
not to damage the interface. Also make sure
that the cover is fitted to the USB port on the
DRIVEPACK during cleaning to prevent dirt from
entering the USB port or DRIVEPACK electronics
and causing damage.
Lubricate the LOCKER for locking the DRIVEPACK
→
to the frame approximately every 2–3 months or
at the latest as soon as it is no longer comfort-
able to operate.
For more information on cleaning and main-
→
taining your drive system, contact a FAZUA certified partner or visit the FAZUA
service platform (https://fazua.com/de/support).
A
99