3. Hold the locking lever [A.5] in the open position and carefully lower the
DRIVEPACK at the same time.
4. Then move the locking lever back to the closed position and remove the
DRIVEPACK from the interface [B.1] on the BOTTOM BRACKET.
16.3 Securing/locking the DRIVEPACK on the e-bike
Depending on the model, a cylinder lock [A.6] is integrated into the frame of your
e-bike, which you can use to lock the DRIVEPACK mounted on the e-bike and there-
fore secure it against theft, etc.
1. If necessary, make sure that the DRIVEPACK is attached to the e-bike correctly.
2. Insert the key [A.7] into the cylinder lock.
3. Turn the key counterclockwise to lock the DRIVEPACK on
the e-bike.
4. Remove the key from the cylinder lock.
In order to unlock the DRIVEPACK again:
1. Insert the key [A.7] into the cylinder lock.
2. Turn the key clockwise to unlock the DRIVEPACK on the
e-bike.
110
US-English | Original instructions
A.1
B.1
A.7
A.7