Set Support Level - FAZUA RIDE 50 TRAIL Notice Originale

4.5 Set support level

→
You can find detailed information here
Chapter 24.3 "Levels of support".
You can use the REMOTE to set the desired support level at any time - even while
riding.
Gently press the upper touch sensor on the REMOTE to switch to the next
→
higher support level.
Gently press the lower touch sensor on the REMOTE to switch to the next lower
→
support level.
OVERVIEW TABLE "SUPPORT LEVELS
Support level
None
Breeze
River
Rocket
The above values for the maximum motor power in the support levels
"Breeze", "River" and "Rocket" correspond to the maximum possible
setting. The "actual" maximum motor power in the three support levels
is set by your e-bike manufacturer according to the model of your e-bike,
i.e. the values for your e-bike may vary from the values specified above.
You can check and individually adjust the maximum motor power using
the FAZUA Toolbox or the FAZUA app.
→ See in Chapter 6.2 "FAZUA app" for more information on the FAZUA app.
In addition to the "regular" support levels, which you can use at any
time*, the drive system has an additional function: The Attack function
allows you to ride with a (higher) maximum motor power of 350 watts
for a short time to momentarily give you an extra push.
→
You can find detailed information here
* depending on the charge level of the BATTERY.
92
in Chapter 24.2 "Setting the pedal support" and in
Color max. motor power
white No support
green Max. configuration 300 W
blue Max. configuration 300 W
pink Max. configuration 300 W
in Chapter 24.3.1 "Attack function"
English | Original instructions