Troubleshooting Table; Declaration Of Conformity - Worx WG324E Notice Originale

TROUBLESHOOTING TABLE

The following table gives checks and actions that you can perform if your machine does not operate correctly. If these
do not identify/remedy the problem, contact your service agent.
WARNING: Switch off and remove the battery pack before investigating fault.
Symptom
Pruning saw fails to
operate
Pruning saw
operates
intermittently
Chain/chain bar
over-heats
Pruning saw rips,
vibrates, does not
saw properly
DECLARATION OF
20 20
CONFORMITY
We,
Positec Germany GmbH
Grüner Weg 10, 50825 Cologne, Germany
Declare that the product
Description Battery-powered pruning saw
Type WG324E WG324E.1 WG324E.9 (3-designation
of machinery, representative of battery-operated
pruning saw)
Function Cutting wood
Complies with the following Directives:
2006/42/EC, 2014/30/EU, 2011/65/EU&(EU)2015/863,
2000/14/EC amended by 2005/88/EC
The notified body involved
Name: SGS Fimko Ltd
Address: Takomotie 8, FI-00380 Helsinki, Finland
Certification No.: MD-183
2000/14/EC amended by 2005/88/EC:
- Conformity Assessment Procedure as per Annex V
- Measured Sound Power Level 88.11 dB(A)
- Declared Guaranteed Sound Power Level 91 dB(A)
Standards conform to
EN 62841-1, EN 12100, EN ISO 3744, EN 55014-1,
EN 55014-2, Parts of EN ISO11680-1
Cordless Pruning Saw
Possible Cause
Out of battery.
Fuse faulty.
Over heating
Applying too much pressure while
cutting.
Loose connection.
Internal wiring defective.
On/Off switch defective.
Chain is over tensioned
Dull chain
Chain tension too loose
Dull chain
Chain worn out
Chain teeth are facing in the wrong
direction
Remedy
Charge the battery pack.
Replace fuse.
Place the machine in a cool, ventilated place to
cool it down
Applying relatively less pressure while cutting
Contact service agent.
Adjust chain tension
Sharpen chain or replace
Adjust chain tension
Sharpen chain or replace
Replace chain
Reassemble with chain in correct
direction
The person authorized to compile the technical file,
Name Marcel Filz
Address Positec Germany GmbH
Grüner Weg 10, 50825 Cologne, Germany
2020/11/16
Allen Ding
Deputy Chief Engineer, Testing & Certification
Positec Technology (China) Co., Ltd
18, Dongwang Road, Suzhou Industrial
Park, Jiangsu 215123, P. R. China
EN