Mitsubishi Electric PAR-30MAA Manuel D'instructions page 9

1Operation mode
Indoor unit operation mode appears here.
2Preset temperature
Preset temperature appears here.
3Clock
(See the Installation Manual.)
Current time appears here.
4Fan speed
Fan speed setting appears here.
5Button function guide
Functions of the corresponding buttons appear
here.
6
Appears when the ON/OFF operation is centrally
controlled.
7
Appears when the operation mode is centrally
controlled.
8
Appears when the preset temperature is centrally
controlled.
9
Appears when the filter reset function is centrally
controlled.
0
Indicates when filter needs maintenance.
aRoom temperature
(See the Installation Manual.)
Current room temperature appears here.
Most settings (except ON/OFF, mode, fan speed, temperature) can be made from the Menu
screen. (Refer to page 18.)
b
Page 14
Appears when the buttons are locked.
Page 14
c
Appears when the On/Off timer or Night setback
function is enabled.
d
Appears when the Weekly timer is enabled.
e
Page 15
Appears while the units are operated in the
energy-save mode.
f
Appears while the outdoor units are operated in
the silent mode.
g
Appears when the built-in thermistor on the
remote controller is activated to monitor the
room temperature (a).
indoor unit is activated to monitor the room
temperature.
h
Indicates the vane setting.
i
Indicates the louver setting.
Page 48
j
Indicates the ventilation setting.
k
Appears when the preset temperature range is
restricted.
appears when the thermistor on the
Page 34
Page 40
Page 28
Page 36
Page 30
Page 20
Page 21
Page 21
Page 32
9