Mitsubishi Electric PAR-30MAA Manuel D'instructions page 29

4
Weekly timer
Mon Tue Wed Thu Fri Sat Sun
No.
Input display:
day
F1
5
Weekly timer
No.
Select:
Cursor
F1
Weekly timer
Changes saved
Day selection:
Room
Cool
Mode
Select Page
F2 F3 F4
Thu
On
Content
F2 F3 F4
Thu
Fri
Set temp. Auto
Temp. Fan
The weekly timer setting screen will appear and
the current settings will be displayed.
Up to eight operation patterns can be set for
each day.
Move the cursor to the desired day of the week
with the F1 or F2 button, and press the
F3 button to select it. (Multiple days can be
selected.)
Press the SELECT button.
Operation pattern setting screen will appear.
Press the F1 button to move the cursor to the
desired pattern number.
Move the cursor to the time, On/Off, or
temperature with the F2 button.
Change the settings with the F3 or F4 button.
Time: settable in 5-minute increments
•
* Press and hold the button to rapidly advance
the numbers.
On/Off
•
Temperature: The settable temperature range
•
depends on the connected indoor units.
Press the SELECT button to save the settings.
A confirmation screen will appear.
Navigating through the screens
• To go back to the setting change/day of the week
selection screen ............................. SELECT button
• To go back to the Main menu .......... MENU button
• To return to the previous screen ...... RETURN button
will appear on the Main display in the Full
mode when the weekly timer setting for the
current day exists.
The icon will not appear while the On/Off timer is
enabled.
29