Mitsubishi Electric PAR-30MAA Manuel D'instructions page 34

Controller operation-Function settings
Restriction
Operation lock function
Button operation
1
Operation locked
On/Off Mode
Vane
Setting display:
Page
F1
2
Operation locked No /
On/Off
Mode
Set temp.
Vane
Select:
Cursor
F1
Operation locked
On/Off Mode Set temp.
Vane
Main menu:
34
Restriction
No
Set temp.
F2 F3 F4
Restriction
Yes
Locked
Locked
Locked
Locked
Cursor
F2 F3 F4
Restriction
Yes
Changes saved
To enable the operation lock function, set
the item "Operation locked" to " Yes".
Bring up the Restriction setting screen. (Refer to
page 32.)
Move the cursor to "Operation locked" and press
the SELECT button.
The screen to make the settings for the operation
lock function will appear.
Move the cursor to the desired item with the F1
or F2 button out of "Operation locked," "On/Off,"
"Mode," "Set temp.," or "Vane."
Change the settings with the F3 or F4 button.
Operation locked: No (disable)/Yes (enable)
•
On/Off: On/Off operation
•
Mode: Operation mode setting
•
Set temp.: Preset temp. setting
•
Vane: Vane setting
•
Press the SELECT button to save the settings.
A confirmation screen will appear.
Navigating through the screens
• To go back to the Main menu .......... MENU button
• To return to the previous screen ...... RETURN button
P
"-" / "Locked"