Set Contents; General Description - ROBBE Power Peak E1 Mode D'emploi

1.

Set contents

1x Power Peak E1
1x Temperatursensor
1x BID-KEY

2. General description

The Power Peak E1 is a good-looking,
high-performance computer-based charge /
discharge station including battery manage-
ment, capable of working with all currently
available battery types. The unit's elegant,
clearly laid-out design is made possible by
the new Cap-Touch system.
The front panel has a smooth surface wit-
hout any projecting controls, thanks to the
use of zero-contact sensors for the switches
and rotary control.
The generous screen (192 x 128 pixels) is
divided into twelve lines, permitting the use
of a large, clearly legible screen font.
The screen displays the essential parame-
ters of the current process in numeric or
graphic form.
The charger incorporates flash memory
technology and is therefore future-proof, as
updated software can be loaded at any time;
the charger can be revised in this way to
cater for new battery technologies or to suit
Operating instructions
Power Peak E1
existing types more accurately.
The charging station can be connected to a
PC via the integral USB port. The renowned
free PC software Logview, which is desig-
ned to record, store, compare and print out
battery data, can be used to process the
data generated by the Power Peak E1 char-
ger.
Download address: www.logview.info
The charger's internal memory enables it to
record data even when it is not connected to
a PC; the data can then be read out and sto-
red later.
In the interests of safety the charger is
capable of monitoring battery temperature;
the temperature can be displayed on-screen
during the charge process. It is even possi-
ble to set up the charger to terminate the
charge process at a particular user-variable
temperature.
The charger features an integral equalizer
for 2 x seven-cell Lithium-Ion, LiPo, LiFe
and special batteries.
A vast array of different battery types is now
available to the modeller, and the range is
constantly expanding; the problem is that
each battery type requires its "own" charge
process. It can happen so quickly: you
switch the system on with the wrong set-
tings - and in a moment your valuable bat-
tery is damaged.
The revolutionary BID system from robbe
provides an ingenious solution to this pro-
blem. A small, lightweight BID chip is assig-
ned to each battery.
4
Order No.
8471
One of the main
features of the
Power Peak E1
is the pionee-
ring Battery
Identification
System (BID).