Mechanical Specifications; Electrical Specifications; Electrical Safety And Electromagnetic Compatibility - Chauvin Arnoux PAC 12 Notice De Fonctionnement

4.4. MECHANICAL SPECIFICATIONS

- Watertightness :
- Clamping diameter : 1 cable ∅ 30 mm (or 2 cables ∅ 24 mm)
- Outside dimensions of clamp : 224 x 97 x 44 mm
- Fitted lead :
- Weight :
- Drop height :
- Protection from shocks : 100 g in accordance with IEC 68-2-27
- Vibrations :

4.5. ELECTRICAL SPECIFICATIONS

- Power supply :
- Battery life :
Operating limits
On DC current :
On AC :
The maximum permitted current (AC) on overload from 1 kHz is defined by the curve shown in the
appendix (page 67) and in accordance with the following formula :
1000
Ip max =
F(kHz)

4.6. ELECTRICAL SAFETY AND ELECTROMAGNETIC COMPATIBILITY

Electrical safety :
According to EN 61010-2-032 600 V CAT III, Pollution degree 2
Electromagnetic compatibility :
According to EN 61326-1
IP 30 in accordance with IEC 529
a busbar of cross section 50 x 10 mm
1.5 m
440 g approx
to IEC 68-2-32
to IEC 68-2-6
9 V battery (type 6LR61, 6LF22 or NEDA 1604)
approx 50h with an alkaline battery
3000 A permanent
1000 A permanent up to 1 kHz
15