Yamaha Motor TT-R90E Manuel D'atelier Du Proprietaire page 37

Part number
YM-1312-A, 90890-01312
YM-1326, 90890-01326
90890-01186
YM-8035, 90890-01311
YM-33963, 90890-01184
YM-34487
90890-06754
YM-33975, 90890-01403
YM-91042, 90890-04086
YS-1880-A, 90890-01701
Tool name/How to use
Fuel level gauge
This gauge is used to measure the fuel level in the
float chamber.
T-handle
This tool is used for holding the damper rod holder
when removing or installing the damper rod holder.
Fork seal driver attachment
This tool is used to installing the oil seal.
Valve adjusting tool
This tool is necessary for adjusting valve clearance.
Fork seal driver weight
This tool is used to installing the oil seal.
Dynamic spark tester
Ignition checker
This instrument is necessary for checking the ignition
system components.
Ring nut wrench
This tool is used when tighten the steering ring nut to
specification.
Clutch holding tool
This tool is used to hold the clutch when removing or
installing the clutch boss securing nut.
Sheave holder
This tool is used for when loosening or tightening the
flywheel magneto securing nut.
SPECIAL TOOLS
YM-1312-A
YM-1326
YM-8035
YM-33963
YM-34487
YM-33975
YM-91042
YS-1880-A
1 - 7
GEN
INFO
Illustration
90890-01312
90890-01326
90890-01186
90890-01311
90890-01184
90890-06754
90890-01403
90890-04086
90890-01701