Electromagnetic Fields (Emf); Preparing For Use; Installing The Appliance - Philips HD3620 Mode D'emploi

EnglisH
8
4222.001.9361.3.indd 8
The keg is under pressure. Do not remove the connection top or
,
pierce the keg with a sharp object.
Maximum working pressure: 1.5 bar.
,
Use the keg only for the HD3620/HD3600 PerfectDraft. Do not
,
connect other equipment to the keg.
Do not use kegs from other suppliers than the ones mentioned in
,
this user manual (see chapter 'Keg suppliers').
Do not use damaged kegs in this appliance, as this could harm the
,
appliance. Return a damaged keg immediately to the shop where you
bought it.
The kegs are not stackable.
,

Electromagnetic fields (EMF)

This Philips appliance complies with all standards regarding electromagnetic
fields (EMF). If handled properly and according to the instructions in this
user manual, the appliance is safe to use based on scientific evidence
available today.

Preparing for use

installing the appliance

1 Put the appliance on a horizontal, even and stable surface. Leave at
least 10cm free space around the appliance for the best performance.
Note: Do not put the appliance in a place where it is exposed to direct sunlight
or to high temperatures (e.g. close to a cooker or an oven).
2 To store excess cord, push it into the storage compartment at the
back of the appliance.
3 Insert the plug into the wall socket.
4 Install the drip tray.
5 Attach the tap handle.
08-02-10 10:51