Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Problem
appliance general
It is not possible to close
the doors.
There is frost on the keg or
on the appliance.
Beer leaks out of the
appliance.
4222.001.9361.3.indd 19
10
Hand in the cooling element at an official collection point for
chemical waste.
guarantee & service
If you need information or if you have a problem, contact us online at
www.philips.com or call the PerfectDraft call centre. Their phone number
is 078-250159 (Belgium), 01801-324000 (Germany) or 0900-2224222
(Netherlands).
When you take the appliance to your dealer or a Philips service centre for
determination of the cause of the problem, also bring the tube and the keg.
guarantee restrictions
Your guarantee becomes invalid if:
-
you do not use the appliance according to the instructions in this user
manual.
-
you use damaged kegs in this appliance.
-
you do not install the kegs according to the instructions in this user
manual.
-
you use kegs from other suppliers than the ones mentioned in this user
manual.
The kegs and tubes are not covered by this guarantee.
,
troubleshooting
If you are unable to solve the problem with the information below,
contact us online at www.philips.com or call the PerfectDraft call centre
at 078-250159 (Belgium), 01801-324000 (Germany) or 0900-2224222
(Netherlands).
Solution
Make sure you push down the blue locking levers until they are in
horizontal position before you close the doors.
Make sure the tube is placed correctly in the tap unit and the tap handle is
in upright position. See chapter 'Preparing for use', section 'Placing the tube
into the tap unit'.
Make sure the tap unit is placed correctly on the keg.
Unplug the appliance and let the keg or appliance defrost. Dry
the appliance or keg with a cloth.
Make sure that the doors are properly closed. For instructions on how to
close the doors, see the chapter 'Preparing for use', section 'Placing the keg
into the appliance'. It is normal for some frost to be present on the back
of the keg.
Make sure that the tap unit and the tube are placed correctly (see chapter
'Preparing for use', sections 'Placing the tap unit onto the keg' and 'Placing
the tube into the tap unit').
EnglisH
19
08-02-10 10:52

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Hd3620/25Hd3620/21Hd3620/22Hd3610/50Hd3610/52Hd3610 ... Afficher tout

Table des Matières