Wavemaster CUBE MINI NEO Mode D'emploi page 20

LOUDNESS (3) With this button, you can activate/deactivate a physiological sound
•
correction to compensate the loss of low frequency range at low volume listening. The effect
strength of the LOUDNESS correction accordingly is dependant from the actual volume
control's setting.
Attention: the Loudness function has no effect at high volume. Whether the Loudness is
activated or deactivated can be heard best with a bass-strong track at a low position of the
volume knob.
BASS +/- and TREBLE +/- (4) This are the buttons to individually control the sound of your
•
CUBE/CUBE
MINI NEO
or high levels by 2 dB.
Zero button 0 (5) This button is part of the sound control setting concept. It can reset the
•
sound settings back to a neutral zero position. The 0 button has two functions:
- If you push the 0 button (within 20 seconds) right after setting of BASS or TREBLE
controls, it will just set to zero the last controlled function – means: BASS or TREBLE will be
set to zero. By this feature it will be possible to control the sound until the best setting is
found, without re-setting both sound controls each time.
- If you push the 0 button without having operated any sound setting buttons before (within
the last 20 seconds), both sound settings – means: BASS and TREBLE – will be reset to
zero.
SOURCE (6) With this button you can select the playback source, same way as the push
•
function of the multifunction knob on the speaker front. .
Volume -/+ (7) With these buttons you can increase (+) or decrease (-) the playback
•
volume, same way as by the turning function of the multifunktion knob on the speaker front.
MUTING (8) This button can mute the playback without changing the volume setting
•
position. To unmute and continue the playback, push the MUTING button again.
. You can change the sound by each +/- 5 steps. Each step changes low
English
20