Assembly and operation
Assembly and operation of your CUBE/CUBE
connections are shown in the following drawing.
Please connect all components only when the mains power switch is switched OFF.
Place the speakers at their target area and start connecting.
•
First, connect the left speaker to the right speaker by the speaker cable. The spring terminals
•
can be released by finger pressure on the button. Insert the stripped cable ends each into the
terminal openings, to have connected red to red (plus) and black to black (minus) of both
speaker boxes to each other. Make sure the cable ends connect well to inter-connect from
the right (active) speaker's amp output to the left (passive) speaker's input.
Please care to avoid short circuits between red and black connectors, not to cause
•
malfunctions or defects!
Connect the input socket on the back of your CUBE/CUBE
•
The LINE 1 phono socket input is prepared for devices with lower Line signal level, like
•
portable MP3-player, smartphones etc.
The RCA sockets LINE 2 are prepared for audio devices with standard Line signal level, e.g.
•
PC or stationary HiFi devices.
The optical TOSLINK input socket can receive digital PCM stereo signals.
•
English
speaker system is very easy to do. General
MINI NEO
MINI NEO
15
to your audio sources.