Publicité
Les langues disponibles
Les langues disponibles
The multifunction knob at the front of the right CUBE/CUBE
•
and turning function. This knob controls the basic functions of your CUBE/CUBE
1. ON and manually OFF: a short push powers ON the device, manually OFF can be
forced by a longer push (>2s) on the knob.
If manually set OFF a static red LED will confirm this.
In case of automatic standby, this will be visible through a slowly blinking red LED.
2. VOLUME control: if the device is ON, by turning the knob, the volume can be increased
or decreased.
After switching OFF and ON, the previous volume setting is recovered.
3. Sequencial input selection (short push on the knob when the device is ON):
Input
LINE 1
LINE 2
Bluetooth
Digital optical
Before mains connections, check your mains power system to be appropriate to the CUBE/
•
CUBE
.
MINI NEO
Connect the mains cable to the mains input socket and the wall socket plug connect to your
•
mains supply.
Switch on the main switch on the back.
•
ON/STANDBY, source selection as well as volume you can control with the multifunction
•
knob on the front of the right speaker box of your CUBE/CUBE
The same and further settings like BASS, TREBLE, DEFEAT, LOUDNESS, and MUTING
•
can be controlled by the infrared (IR) remote control.
Note: If you emphasize the bass control too much, the maximum total volume will be limited
since the woofer may run at overstroke earlier. Please care not to overstroke the woofer too
much (audible distortions) since this can reduce the life-span of the woofers!
AUDIO SIGNAL SENSING: if the input signal is very low or off for more than 10 minutes, the
•
audio signal sensing automatically switches to STANDBY. Once there is an audio signal, the
audio signal sensing automatically switches ON again!
This technology is beneficial with many sources, especially with any kind of wireless sources
such as Airplay (WLAN) or Bluetooth audio systems: you can operate the wireless audio
source and the speaker system activates or deactivates according to the provided audio
signals.
Socket
Phono Socket
3.5mm stereo
RCA L, R
-
S/P-DIF TOSLINK
English
MINI NEO
Indication Colour
green
white
blue
orange
16
speaker box offers push
MINI NEO
Signal Source, Format
Smartphone, MP3-Player,
lower level, apprx. 500mV
PC, stationary HiFi
standard level max. 2000mV
Bluetooth Audio A2DP
PCM max. 24 Bit / 96 kHz
Sound System.
MINI NEO
:
Publicité
