English
Audio Configurations
Connection to analogue audio sources with RCA- or phono connector outputs
To connect with conventional stereo use RCA-to-RCA or phono-to-phono audio cables and
connect it to the LINE 1 or LINE 2 inputs on the back of your CUBE/CUBE
.
MINI NEO
The input sensitivity of the 3.5mm phono socket LINE 1 is prepared for portable devices like
smartphones, MP3-player etc.
The input sensitivity of the RCA input LINE 2 is prepared for high (standard) line levels, as
provided by stationary HiFi or PC.
If your audio source is mains powered, like streaming devices, you can connect it to the mains
socket on the back of your CUBE/CUBE
.
MINI NEO
Connection to digital audio sources with S/P-DIF connectors
Digital optical socket (S/P-DIF TOSLINK): employ a standard optical cable and connect it to
the OPTICAL input on the back of your CUBE/CUBE
. Please remember to never bend
MINI NEO
the optical cable in a small or sharp angle, to avoid damage of the optical fibre! The optical input
of CUBE/CUBE
supports digital PCM STEREO signals up to 24 Bit / 96 kHz.
MINI NEO
17