Publicité
Les langues disponibles
Les langues disponibles
Bluetooth Audio Playback
Activate the Bluetooth (BT /
CUBE/CUBE
MINI NEO
by short pushing the volume knob (SOURCE on IR remote) until reaching the BT position (blue
colour indication).
1. CUBE/CUBE
MINI NEO
BT control LED.
The BT system first tries to re-connect with previous BT source and is protected against any
other device at this moment!
In case an earlier connected BT source is available, CUBE/CUBE
to that BT source again. When connected, the BT control LED lights constantly. Now you can
start BT playback through CUBE/CUBE
2. In case no prior connected source is available, after few seconds, CUBE/CUBE
search for new BT sources. This action will be confirmed by quick flashing of the BT control
LED.
Just during this search phase the BT system is visible to other devices for apprx. 2 minutes
and can be paired to a new source
Now start the Bluetooth search function of your BT souce (e.g. smartphone). After a moment,
you can find "wm CUBE mini" resp. "wm CUBE" in the BT devices list of your BT
source. Select it for pairing. Your BT source will now pair with CUBE/CUBE
pairing procedure is finished the CUBE/CUBE
When the BT connection is interrupted through foreign signals interference or by too long
distance, playback will be stopped and the BT control LED shows flashing light. Once the BT
source can be received again, playback continues and the BT control LED lights constant again.
BT safety: Bluetooth offers a high safety and is protected against foreign access. To connect
CUBE/CUBE
MINI NEO
BT sources only during the BT search phase and can be paired to a new BT source. After apprx.
2 minutes the search phase is ended and the system will be protected against foreign access
again.
To switch off the Bluetooth function select any other input source. This will completely deactivate
the built-in BT function.
Bluetooth playback from PC: please note, for audio playback, the source device need to
support the Bluetooth standard A2DP. In case of e.g. WINDOWS (TM) operating systems, it is
inevitable to MANUALLY install the Bluetooth driver of the Bluetooth device maker! The Windows
internal driver by the automatic driver installation is not suitable to support A2DP BT audio!
Subwoofer Output
The subwoofer output of CUBE/CUBE
input and electronic subwoofer filters, to extend the system playback at the range of lowest
frequencies. This output provides the non-filtered mono summary signal of the actual playback
source, in dependance from CUBE/CUBE
match the subwoofer with CUBE/CUBE
controls of a connected active subwoofer .
) function of your audio source (e.g. your smartphone). Switch on
by pushing on the volume knob or the IR remote POWER button. Select BT
confirms the activation of its Bluetooth function through slow flashing the
to a new BT source, after activating the BT function, it will be visible to other
MINI NEO
MINI NEO
English
.
MINI NEO
blue BT control LED lights constantly.
MINI NEO
offers the connection to a active subwoofer with line
's volume control. All sound adjustments to
MINI NEO
need to be set by using the filters and other
18
will instantly connect
MINI NEO
MINI NEO
. Once the
MINI NEO
will
Publicité
