Safety Measures; Fcc/Ce Warning - Philips WelcomeHive Pro Manuel D'installation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 4

8. SAFETY MEASURES

Damage caused by failing to adhere to the manual nullifies the warranty. We will not accept
liability for damage resulting from non-compliance!
We will not accept liability for any harm to goods or people caused by improper handling or
failure to adhere to safety instructions.
This product was manufactured in total compliance with safety guidelines. In order to
maintain this status and provide for the best possible conditions of usage, the user must
adhere to the safety instructions and warnings in this manual.
: This symbol indicates a risk of electrical shock or short-circuiting.
- Only use this product with electrical current in the following ranges: 100-240 volts and
50-60 hertz. Never try to use this device with an electrical current outside of these ranges.
- Verify that all of the electrical connections of the system are consistent with the usage
instructions.
- In commercial establishments, be sure to adhere to accident prevention rules for electrical
installations.
- For schools, training equipment, workshops, etc., the presence of qualified personnel is
needed to monitor operation of the electronic devices.
- Adhere to the usage instructions for other devices connected to the system.
- Contact a person with experience if you are unsure about how to operate the system or
about the safety of devices.
- Never plug in or unplug electrical devices with wet hands.
- When installing this product, verify that the power wires are not at risk of being damaged.
- Never replace damaged electrical wires yourself! If an electrical wire is damaged, remove
it and ask for help from a person with experience.
- The electrical socket must be close to the device and must be easily accessible.
- A readily accessible cut-off device (disconnector switch, circuit breaker or equivalent)
must be included in the building's wiring system for equipment permanently linked to the
network.
- Maintain a minimum distance around the device to ensure adequate ventilation.
- Ventilation should not be impeded by covering the ventilation opening with objects such
as a newspaper, tablecloth, curtain, etc.
- Sources of naked flame, such as a lit candle, should not be placed on the device.
- Comply with the product's operating temperature.
- The device should not be exposed to any flow or splash of liquid and liquid-filled objects,
such as a vase, should not be placed on the device.

9. FCC/CE WARNING

Note:
This equipment has been tested and found to be compliant with the limits of a Class
B device, according to European standards in force. These limits are designed to provide
reasonable protection against interference in a residential installation. This equipment
uses and may emit radio frequency energy and, if not fitted and used according to the
instructions, may cause interference to radio communication.
There is no guarantee, however, that interference will not occur in a particular system. If
this equipment causes interference to radio or TV reception, which can be established by
starting and stopping it, users are encouraged to try to correct the interference by one of
the following methods:
WelcomeHive Pro Monitor / V1
GB12

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

531032

Table des Matières