LaserLiner ThermoXplorer Pro Mode D'emploi page 40

18.1
Horizontal line measurement / arrangement
The horizontal line is at 120 (display 240 lines). The bargraph defines the limits of the set
min./max. temperature range (see chapter 21). The dynamic temperature curve visualises
even the smallest changes in temperature within that temperature range, especially if the
colours of the IR image do not provide sufficient differentiation. The temperature curve
only covers the min./max. temperatures shown in the bargraph.
Measurement
point temperature
(centre of
horizontal line)
Variable horizontal
measurement level
Min. temperature
18.2 Horizontal line measurement / parameters
LH=17.2
Emissivity
Set emissivity for the horizontal
line (LH). Refer to Section 11.1.
A * symbol is shown
! next to the measured
value if values are de-
fined for measurement
points, lines or areas.
Delete line
The line is deleted.
40
GB
LH=17.2
LH=17.2 S1= 19.3 S1= 19.3
LH=17.2* S1= 19.3 S1= 19.3
Settings
Emissivity 0.60
Delete line No
Settings
Emissivity 0.60
Delete line Yes
Temperature curve
Bargraph with
min./max. scale
Max. temperature