LaserLiner ThermoXplorer Pro Mode D'emploi page 39

16.2
Measurement points / position manual measurement point
S1=19.3
17
Hot spot and cold spot
In terms of function and operation, the hot spot and cold spot correspond to the
measurement points (see Section 16 ff) and are to be used in the same way.
Measurement
Level/Span
Setup
File
Add Hot spot
Hot spot (SH) shows
the hottest point.
Add Cold spot
Cold spot (SC) shows
the coldest point.
18.0
Activate / deactivate horizontal line measurement
Horizontal line measurement determines the temperature of an object along a flexible
horizontal line on the display. It graphically displays particularly small temperature
differences by means of a graph when the colour nuances of the IR image cannot
be sufficiently distinguished.
Measurement
Level/Span
Setup
File
!
All added measurement points, lines and areas are removed by selecting „None".
S1=19.3 S1= 19.3 S1= 19.3
1
Measurement
Type
Measurement
Type
Measurement
Type
Measurement
Type
ThermoXplorer Pro
None
Add Hot Spot
Add Cold Spot
Horizontal
39
GB