9.
Turn on the utility power to the transfer switch.
10. Set the AUTO/OFF/MANUAL switch to AUTO.
11. The generator is now ready for service.
If the battery was dead or disconnected, the exercise timer
(single cylinder), current date and time (v-twin) must be reset.
4.11.3 ACCESSORIES
There are performance enhancing accessories available for the
air-cooled generators.
•
Cold Weather Kits
are recommended in areas where tempera-
tures regularly fall below 10° F (-12° C).
•
Scheduled Maintenance Kits
perform maintenance on the generator along with oil recom-
mendations.
•
Auxiliary Transfer Switch Lockout
switches to completely lock out one large electrical load by
tying into its control system.
•
A Fascia Skirt Wrap
is standard on all 20kW units. It's avail-
able for all other current production air-cooled units. It snaps
together to provide a smoothing, contoured look as well as
rodent/insect protection.
•
The PowerMaster
load prioritization device allows home own-
ers to potentially operator two (2) large electrical loads by giv-
ing one (1) priority over the other.
•
The Remote Monitor System
box that indicates generator run status and allows for exercise
programing as well as provide maintenance reminders.
•
Touch-up Paint Kits
are very important to maintain the look and
integrity of the generator enclosure. These kits include touch-up
paint and instructions if the need should arise.
For more details on accessories, please contact a Dealer.
28
Section 4 — Maintenance
Air-cooled Generators
NOTE:
include all pieces necessary to
enables any of the transfer
is a wireless, indoor mounted,