endolite Avalon K2 Instructions D'utilisation page 3

2 Construction
Principal parts:
• Hydraulic Body Assembly including pyramid (Aluminum/St. Stl./Titanium)
• Carrier Assembly (Aluminum/St. Stl.)
• Keel (Thermoplastic Composite)
• Keel attachment screws (St. Stl.)
• Glide Sock (UHM PE)
• Foot shell (PU)
3 Function
The Avalon comprises a hydraulic body with a valve that can be adjusted to increase
K2
or reduce hydraulic resistance to plantar flexion and dorsi flexion simultaneously. The
hydraulic body is connected to a carrier assembly via two pivot pins. A keel is attached
to the carrier assembly using stainless steel screws. The foot is wrapped in a UHM PE
sock which is in turn surrounded by a PU foot shell.
Glide
sock
Foot
Shell
Resistance Adjuster
2.5
3
Hydraulic
Body
Carrier
Assembly
Keel
938327/5-0116