Components
2. Power trim and tilt switch
3. Free accelerator
4. Throttle friction adjuster
EMU26191
Remote control lever
Moving the lever forward from the neutral po-
sition engages forward gear. Pulling the lever
back from neutral engages reverse. The en-
gine will continue to run at idle until the lever
is moved about 35° (a detent can be felt).
Moving the lever farther opens the throttle,
and the engine will begin to accelerate.
1. Neutral " "
2. Forward " "
3. Reverse " "
4. Shift
5. Fully closed
6. Throttle
7. Fully open
F
4
2
6
5
7
1. Neutral " "
2. Forward " "
3. Reverse " "
30
N
1
R
4
3
6
5
7
ZMU04573
4. Shift
5. Fully closed
6. Throttle
7. Fully open
EMU26202
Neutral interlock trigger
To shift out of neutral, first pull the neutral in-
terlock trigger up.
1. Neutral interlock trigger
EMU26213
Neutral throttle lever
To open the throttle without shifting into ei-
ther forward or reverse, put the remote con-
trol lever in the neutral position and lift the
neutral throttle lever.
1. Fully open
2. Fully closed
3. Neutral throttle lever
1
3
2
ZMU06988