Installation Requirements; Boat Horsepower Rating - Yamaha F175 Manuel De L'utilisateur

Specifications and requirements
Maximum generator output:
50 A
Lower unit:
Gear shift positions:
Forward-neutral-reverse
Gear ratio:
1.86 (26/14)
Trim and tilt system:
Power trim and tilt
Propeller mark:
F175A M/T
F200B M/T
F200FET1 M/T
FL200FET1 ML/TL
LF200B ML/TL
Fuel and oil:
Recommended fuel:
F175A Regular unleaded gasoline
F200B Mid-grade unleaded gasoline
(For North America), Premium unleaded
gasoline
F200FET1 Mid-grade unleaded gasoline
FL200FET1 Mid-grade unleaded
gasoline
LF200B Mid-grade unleaded gasoline
(For North America), Premium unleaded
gasoline
Min. pump octane number (PON):
F175A 86
F200B 89
F200FET1 89
FL200FET1 89
LF200B 89
Min. research octane number (RON):
F175A 90
F200B 94
LF200B 94
Recommended engine oil:
YAMALUBE 4M FC-W or 4-stroke
outboard motor oil
16
Recommended engine oil grade 1:
SAE 10W-30/10W-40/5W-30
API SE/SF/SG/SH/SJ/SL
Engine oil quantity (without oil filter
replacement):
4.3 L (4.55 US qt, 3.78 Imp.qt)
Engine oil quantity (with oil filter
replacement):
4.5 L (4.76 US qt, 3.96 Imp.qt)
Lubrication system:
Wet sump
Recommended gear oil:
Yamalube Marine Gearcase Lube HD or
Hypoid gear oil
Recommended gear oil grade:
SAE 90 API GL-4 / SAE 80W API GL-5 /
SAE 90 API GL-5
Gear oil quantity:
0.980 L (1.036 US qt, 0.862 Imp.qt)
Tightening torque:
Spark plug:
28 Nm (2.86 kgf-m, 20.7 ft-lb)
Propeller nut:
54 Nm (5.51 kgf-m, 39.8 ft-lb)
Engine oil drain bolt:
27 Nm (2.75 kgf-m, 19.9 ft-lb)
Engine oil filter:
18 Nm (1.84 kgf-m, 13.3 ft-lb)
EMU33555

Installation requirements

EMU33565

Boat horsepower rating

EWM01561
WARNING
Overpowering a boat can cause severe in-
stability.
Before installing the outboard motor(s), con-
firm that the total horsepower of your out-
board motor(s) does not exceed the boats
maximum horsepower rating. See the boat's
capacity plate or contact the manufacturer.