Inspecting And Replacing Anodes; Anodes, Inspecting And Replacing - Yamaha VF150 Manuel De L'utilisateur

6. Put a new gasket on the oil level plug.
When the oil begins to flow out of the oil
level plug hole, insert and tighten the oil
level plug to the specified torque.
TIP:
Apply a light coat of gear oil to the oil level
plug thread and gasket before installation.
Tightening torque:
7 N·m (0.71 kgf·m, 5.2 lb·ft)
7. Put a new gasket on the gear oil drain
screw. Insert and tighten the gear oil
drain screw to the specified torque.
TIP:
Apply a light coat of gear oil to the gear oil
drain screw thread and gasket before instal-
lation.
Tightening torque:
7 N·m (0.71 kgf·m, 5.2 lb·ft)
EMU41137

Inspecting and replacing anodes

Yamaha outboard motors are protected from
corrosion by sacrificial anodes. Inspect the
external anodes periodically. Remove scales
from the surfaces of the anodes. Consult a
Yamaha dealer for replacement of external
anodes.
ECM00721
NOTICE
Do not paint anodes, as this would render
them ineffective.
TIP:
Consult a Yamaha dealer for inspecting and
replacement of internal anodes attached to
the engine.
VF150LA, VF175LA
ZMU08024
1
1. Anode
Maintenance
1
ZMU07785
91