4
Replacing solenoid valve
Solenoid valve for DN 20 | DN 25
Art. No.: 3691300100
This work may only be carried out by
a qualified electrician!
1
Danger!
Disconnect the system from the power supply!
2
Drain tank (see operating instructions Section 1.4).
3
Open the controller housing using a flat-headed screwdriver.
4
Disconnect the cable from the solenoid valve and remove it from
the controller housing.
i
5
Pull the hoses from the plug-in connectors.
6
Unscrew the solenoid valve
from the bracket.
7
Unscrew the plug-in connectors from the solenoid valve.
8
Install the new valve in the reverse order.
© www.kemper-olpe.de – K41003690008-00 / 04.2022 – 21 /88