Victron energy 12/3000/120-50/30 Manuel page 26

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 59
Step 2: Exem plary setting for parallel mode
In this example, the master is configured according to factory settings.
The slaves do not require setting!
Master
DS-8 Ch. v oltage(GEL 14,4V)
DS-7 Ch. v oltage(GEL 14,4V)
DS-6 Absorption time (8 h)
DS-5 Adaptiv e charging (on)
DS-4 Dy n. current limit (of f )
DS-3 UPS f unction (on)
DS-2 Voltage (230V)
DS-1 Frequency (50Hz)
To store the settings after the required values have been set: press the 'Dow n' button of the master for 2 seconds (lower button
to the right of the DIP sw itches). The temperature and low-battery LEDs w ill flash to indicate acceptance of the settings.
You can then leave the DIP sw itches in the selected positions, so that the 'other settings' can alw ays be recovered.
To start the system: first, turn all devices off. The system w ill start up as soon as all devices have been turned on.
Step 2: Exem plary setting for 3-phase mode
In this example the leader is configured according to factory settings.
Leader (L1)
DS-8 Ch. Volt. GEL 14,4V
DS-7 Ch. Volt. GEL 14,4V
on
DS-6 Absorption time (8 h)
on
DS-5 Adaptiv e ch. (on)
on
DS-4 Dy n. current limit (of f )
DS-3 UPS f unction (on)
on
DS-2 Voltage (230V)
on
DS-1 Frequency (50Hz)
on
To store the settings after the required values have been set: press the 'Dow n' button of the leader for 2 seconds (lower button
to the right of the DIP sw itches). The temperature and low-battery LEDs w ill flash to indicate acceptance of the settings.
The DIP sw itches can be left in the selected positions, so that the 'other settings' can alw ays be recovered.
To start the system: first, turn all devices off. The system w ill start up as soon as all devices have been turned on.
6. MAINTENANCE
The Quattro does not require specific maintenance. It w ill suffice to check all connections once a year. Avoid moisture and
oil/soot/vapours, and keep the device clean.
22
Slave 1
of f
DS-8 na
on
DS-7 na
on
DS-6 na
on
DS-5 na
of f
DS-4 na
on
DS-3 na
on
DS-2 na
on
DS-1 na
Follower (L2)
of f
DS-8 na
DS-7 na
DS-6 na
DS-5 na
of f
DS-4 D. c. l. (of f )
DS-3 UPS f . (on)
on
DS-2 V (230V)
on
DS-1 na
Slave 2
DS-8 na
DS-7 na
DS-6 na
DS-5 na
DS-4 na
DS-3 na
DS-2 na
DS-1 na
Follower (L3)
DS-8 na
DS-7 na
DS-6 na
DS-5 na
of f
DS-4 D. c. l. (of f )
DS-3 UPS f . (on)
on
DS-2 V (230V)
on
DS-1 na
of f

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

24/3000/70-50/3048/3000/35-50/30

Table des Matières