Bosch 1810PS Consignes De Fonctionnement/Sécurité page 11

*Always follow manufacturer instructions*
BM 1609929J65 01-11:BM 1609929J65 01-11 1/20/11 10:41 AM Page 11
DISC GRINDING WHEEL ASSEMBLy
(Models 1810PD, 1810PSD, 1811PS
& 1811PSD only)
Disconnect tool from power source. Be sure
that wheel guard is in place for grinding. Place
BACKING FLANGE and GRINDING WHEEL
on the spindle. Thread on the lock nut and
tighten nut using the supplied lock nut wrench,
while holding the spindle lock in (Fig. 3).
TO REMOVE: Reverse procedure.
When using spin-on wheels, thread directly
onto the spindle.
TYPE 27
GRINDING
WHEEL
DISC GRINDING WHEEL ASSEMBLy
(Model 1812PSD only)
Disconnect tool from power source. Be sure
that wheel guard is in place for grinding.
When using mounting wheels, thread LARGE
BACKING FLANGE onto spindle, then place
GRINDING WHEEL on the spindle. Thread
on the lock nut and tighten nut using a lock
nut wrench provided with adapter kit, while
holding the spindle lock in (Fig. 4).
TO REMOVE: Reverse procedure.
When using spin-on wheels, thread directly
onto the spindle.
SPINDLE
BACKING
FLANGE
LOCK NUT
GRINDING
-11-
*AAA Rent-All 225-291-1356*
FIG. 3
TYPE 27
GRINDING
WHEEL
LOCK NUT
FIG. 4
TYPE 27
WHEEL
GUARD
LARGE
BACKING
FLANGE
TYPE 27
WHEEL
LOCK NUT
SPINDLE
TYPE 27
WHEEL GUARD
BACKING
FLANGE
TYPE 27 SPIN-ON
GRINDING WHEEL
SPINDLE
TYPE 27 SPIN-
ON GRINDING
WHEEL