dirna Bergstrom SCANA PGR DINAMIC 1.1 Manuel De L'utilisateur page 7

DINAMIC
With this function, compressor goes into maximum power with minimum air speed.
Compressor is activated or desactivated according to temperature selected on display.
By maintaining +
display. Release on desired speed.
-
By maintaining
display. Release on desired speed.
-
+ By pushing only once, one key or the other, desired temperature is chosen, between
15º and 27º C - 59-80º F
The condenser fan and compressor connect and disconnect automatically when the chosen
temperature is reached. (e.g. temperature chosen 23º, the compressor and the condenser
fan disconnect at 21º and reconnect at 24º).
It indicates temperature inside vehicle. In this functioning mode, equipment is switched
off.
Hours de functioning and switching off from 0 to 9 hours. On 0 hour, it does not temporise, it
is in manual functioning F0.
To select hours, user will employ
Choose hour which appears on display, 1H (one hour), 2H (two hours)....9H (nine hours),
and push On/Off
will stop when this time period is over.
F0 Manual functioning
, pushed, blower speed increases and U1, U2, U3, U4, U5 appear on
, pushed, blower speed decreases and U1, U2, U3, U4, U5 appear on
F1 Digital thermometer module
F2 Time programming
-
+
select F4 o F0 , equipment will be working during selected time and
keys.
7
EN
®