Using The Appliance - Philips Multigroom QG33 Série Mode D'emploi

10
English
Charging with the supply unit

Using the appliance

Trimming tips
QG3320) or 45 minutes (QG3338, QG3334, QG3321,
QG3341, QG410).
Note: This appliance can only be used without
cord.
1 Make sure the appliance is switched off.
2 Put the small plug in the appliance and put the
supply unit in the wall socket.
3 After charging, remove the supply unit from the
wall socket and pull the small plug out of the
appliance.
The accessories supplied may vary for different
products. The box shows the accessories that have
been supplied with your appliance.
Always check the appliance and all accessories
before use. Do not use the appliance or any
accessory if it is damaged, as this may cause
injury. Always replace a damaged part with one of
the original type.
- If you are trimming for the first time, be careful.
Do not move the appliance too fast. Make
smooth and gentle movements
- Since all hairs do not grow in the same
direction, you may want to try different
trimming positions (i.e. upwards, downwards, or
across). Practice is best for optimum results.
- Always make smooth and gentle movements
and be sure the surface of the comb always
stays in contact with your skin.
Note: This appliance can only be used without
cord.