Sony HT-RT3 Mode D'emploi page 15

Tip
You can enable or disable codec AAC from
BLUETOOTH device (page 18).
To disconnect the BLUETOOTH
device
Perform any of the following items.

Press PAIRING on the Subwoofer
again.

Disable the BLUETOOTH function on
the BLUETOOTH device.
 Turn off the system or the BLUETOOTH
device.
Connecting to a remote
device by One-touch
function (NFC)
NFC (Near Field Communication) is a
technology enabling short-range
wireless communication between
various devices.
By holding an NFC-compatible remote
device near to the N-Mark on the
Subwoofer, the system and remote
device proceed to complete pairing and
the BLUETOOTH connection
automatically.
Compatible remote devices
Remote devices with a built-in NFC
function
(OS: Android 2.3.3 or later, excluding
Android 3.x)
Notes

The system only can recognize and
connect to one NFC-compatible remote
device at a time.

Depending on your remote device, you
may need to perform the following items
on your remote device in advance.
 Turn on the NFC function. For details,
refer to the operating instructions of
the remote device.
 If your remote device is having an older
OS version than Android 4.1.x,
download and start the "NFC Easy
Connect" application. "NFC Easy
Connect" is a free application for
Android remote devices that can be
obtained from Google Play. (The
application may not be available in
some countries/regions.)
1
Hold the remote device near to
the N-Mark on the Subwoofer
until the remote device vibrates.
Follow the on-screen instructions
displayed on the remote device,
and complete the procedure for
BLUETOOTH connection.
When the BLUETOOTH connection
is established, the blue LED
indicator lights up.
2
Start playback of audio source on
the remote device.
For details on playback operations,
refer to the operating instructions of
your remote device.
15
US