Bluetooth Functions; Listening To Music From A; Bluetooth Device - Sony HT-RT3 Mode D'emploi

BLUETOOTH Functions

Listening to music from a

BLUETOOTH device

Pairing this system with a
BLUETOOTH device
Pairing is an operation where
BLUETOOTH devices register with each
other beforehand. Once a pairing
operation is performed, it does not need
to be performed again.
1
Place the BLUETOOTH device
within 1 meter (3.3 feet) from the
Subwoofer.
2
Press PAIRING on the
Subwoofer.
The blue LED indicator flashes
quickly during BLUETOOTH pairing.
3
Turn on the BLUETOOTH function,
and then select "HT-RT3" after
searching for it on the BLUETOOTH
device.
Perform this step within 5 minutes,
otherwise pairing mode will be
canceled.
When the BLUETOOTH connection
is established, the blue LED
indicator lights up.
14
US
Notes

If passkey is required on the BLUETOOTH
device, enter "0000". Passkey may be
called "Passcode", "PIN code", "PIN
number" or "Password".

You can pair up to 9 BLUETOOTH devices.
If the 10th BLUETOOTH device is paired,
the least recently connected device will
be replaced by the new one.
Listening to music from the
paired device
1
Turn the BLUETOOTH function of
the paired device to on.
2
Press INPUT repeatedly to select
"BT".
The system automatically
reconnects to the BLUETOOTH
device it was most recently
connected to.
When the BLUETOOTH connection
is established, the blue LED
indicator lights up.
3
Start playback on the BLUETOOTH
device.
4
Adjust the volume.

Adjust the volume of the
BLUETOOTH device.

Adjust the volume of the system
by pressing  +/–.

Adjust the volume of Subwoofer
by pressing SW  +/–.
Notes

Once the system and the BLUETOOTH
device are connected, you can control
playback by pressing  and /.

You can connect to the system from a
paired BLUETOOTH device even when the
system in standby mode, if you set the
"BTSTB" to "ON" (page 18).

The audio playback on this system may
be delayed from that on the BLUETOOTH
device because of the characteristics of
the BLUETOOTH wireless technology.