Glass Panel & Door Installation And Removal - Genesis INFINITY DESIGNER CLEAN FACE Série Manuel D'installation Et Guide De L'utilisateur

Table des Matières

Publicité

3.3.5
OUTER GLASS PANEL/DOOR REMOVAL & INSTALLATION.
INNER &
BE VERY CAREFUL WHEN HANDLING THE GLASS. DO NOT
OUTER GLASS PANEL/DOOR REMOVAL
1/. Do not attempt removal until fireplace and glass are cool to touch. Remove front air intake louver
2/. Unscrew the 3 front thumbscrews at the bottom so they are loose and slide back towards yourself
3/. Install glass suction cup lifter, do not attempt removal without suction lifter firmly attached.
4/. With aid of suction lifter, lift glass straight up, then while lowering the glass, carefully angle bottom towards you
and past front of fireplace until cleared at the bottom. Be extra careful so as not to damage glass.
INNER GLASS PANEL REMOVAL.
1/. Do not attempt removal until fireplace and glass are cool to touch.
2/. Install glass suction cup lifter, do not attempt removal without suction lifter firmly attached.
3/. Remove the top 3 thumbscrews
4/. Hold suction cup lifter and loosen the bottom 3 screws, unlike the top thumbscrews these do not
need to be completely removed but leave the bottom channel in place.
5/. With aid of suction lifter, lift glass straight up, then while lowering the glass, carefully angle bottom towards you
and past front of fireplace until cleared at the bottom. Be extra careful so as not to damage glass.
REMOVE THUMBSCREW AND
SIDE PANEL THEN REMOVE
DOOR
DAMAGE
Page 35 of 55

Publicité

Table des Matières
loading

Produits Connexes pour Genesis INFINITY DESIGNER CLEAN FACE Série

Ce manuel est également adapté pour:

Infinity-60

Table des Matières