Logs, Rocks & Glass Media Installation - Genesis INFINITY DESIGNER CLEAN FACE Série Manuel D'installation Et Guide De L'utilisateur

3.3.4 LOGS, ROCKS AND GLASS PEBBLE INSTALLATION
Burn media positions are critical to the safe and clean operation of this appliance.
Never add any other material into the firebox. Use only with burn media supplied
with this unit.
Les positions des médias de brûlure sont critiques au fonctionnement sûr et propre
de cet appareil. N'ajoutez jamais d'autres matériaux dans la chambre de combustion.
Utilisez uniquement avec les supports de gravure fournis avec cet appareil.
Step 1.
Note the burner pattern before you commence installing the burn media. Logs may not be
exactly as shown.
It is critical that logs 5,
6 &7 cross the burner
where the single row of
burner holes are.
Step 2
Sprinkle a light layer of clear glass on top of the burner tray. Make sure you do not cover the air vents
or get any glass in the pilot hole or down inside the fans.
This shows positions of media critical to correct flame pattern.
You will need to refer to this diagram for burner hole patterns.
6
5
7
Page 32 of 55