Table des Matières
Publicité
Termination above Roof
Consult local codes for minimum vent cap height above the roof (X), vent must be a minimum of 2' from any
wall.
To prevent water seepage; install the flashing with upper portion under the roofing material and the lower
portion over the roofing material.
Note: Do not fasten down until the final adjustments to the vent have been made.
The diagram at right shows the
minimum clearances as per the
chart on page 34.
3"
12" from
grade
Page 30 of 55
Publicité
Table des Matières
