Installation Requirements; Installation Methods - Gree XK76 Mode D'emploi

4.2 Installation Requirements

(1) Prohibit installing the wired controller at wet places.
(2) Prohibit installing the wired controller at the places with direct sunshine.
(3) Prohibit installing the wired controller at the place near high temperature
objects or water-splashing places.

4.3 Installation Methods

Fig. 23 is the simple installation process of wired controller; please pay attention to
the following items:
(1) Before installation, please cut off the power for indoor unit;
(2) Pull out the four-core twisted pair line from the installation holes and then let it go
through the rectangular hole behind the soleplate of the wired controller.
Fig. 23 Installation diagram for wired controller
Wired Controller XK76 Owner's Manual
Connect to either H1
terminal or H2 terminal.
As to which terminal
should be connected,
it depends.
23