Installation Of Indoor Unit; Indoor Unit - Gree GMV-ND22C/A-T Manuel D'utilisateur

2 Installation of Indoor Unit

 Selection of Installation location .
（1）Such a place where cool air can be distributed throughout the room.
（2）Such a place where condensation water is easily drained out.
（3）Such a place that can handle the weight of indoor unit.
（4） Such a place which has easy access for maintenance.
（5）The appliance shall not be installed in the laundry.
 There are 2 styles of installation.
（1）Wall mounted;
（2）Floor type.
Each type is similar to the other as follows;

2.1 Indoor Unit

 The indoor unit should be sited in a place where:
（1）The restrictions on installation specified in the indoor unit installation drawings are met.
（2）Both air intake and exhaust have clear paths met.
（3）The unit is not in the path of direct sunlight.
（4）The unit is away from the source of heat or steam.
（5）There is no source of machine oil vapour (this may shorten indoor unit life).
（6）Cool(warm) air is circulated throughout the room.
（7）The unit is away from electronic ignition type fluorwscent lamps (inverter or rapid stert
type) as they may shorten the remote controller range.
（8）The unit is at least 1 metre away from any television or radio set(unit may cause
interference with the picture or sound).
Cautions for Installation where air conditioner troubleis liable tooccur.
● Where there is too much of oil area.
● Where it is acid base area.
● Where there is irregular electrical supply.
Indoor Unit Installation Drawings
The indoor unit may be mounted in any of the three styles shown here.
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
Multi Variable Air Conditioners Floor and Wall Mounted Type Indoor Unit
3