Télécharger Imprimer la page

Publicité

Les langues disponibles

Les langues disponibles

Multi Variable Air Conditioners Floor and Wall Mounted Type Indoor Unit

6.3 Filters

(1)Open the front panel.
(2)Remove the air filter.
· Press the claws on the right and left of the air filter down slightly, then pull upward.
(3)Take off the Titanium Apatite Photocatalytic Air-Purifying Filter.
· Hold the tabs of the frame, and remove the claws in 4 places.
(4) Clean or replace each filter.
(5)Set the air filter and Titanium Apatite Photocatalytic
Air-Purifying Filter as they were and close the front panel.
· Operation without air filters may result in troubles as dust will accumulate inside the
indoor unit.
(6)Wash the air filters with water or clean them with vacuum cleaner
· If the dust does not come off easily, wash them with neutral detergent thinned with
lukewarm water, then dry them up in the shade.
· It is recommended to clean the air filters every week.
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
22

Publicité

loading

Ce manuel est également adapté pour:

Gmv-nd28c/a-tGmv-nd36c/a-tGmv-nd45c/a-tGmv-nd50c/a-t