Space Requirements For Installation - Gree EVO Série Manuel D'utilisateur

Mini Chiller
(2) HLR12Pd/Na-M, HLR14Pd/Na-M

8.2.3 Space Requirements for Installation

8.2.4 Precautions on installation of the Monobloc Unit
(1) When moving the monobloc unit, it is necessary to adopt 2 pieces of long enough rope to hand
the unit from 4 directions. Included angle between the rope when hanging and moving must be
40°below to prevent center of the unit from moving.
(2) The monobloc unit should be installed on concrete base that is 10cm height.
(3) Requirements on installation space dimension of unit's bodies are shown in following drawing.
(4) The monobloc unit must be lifted by using designated lifting hole. Take care to protect the unit
during lift. To avoid rusting, do not knock the metal parts.
367
1390
2000
＞
13
eries