Appendix C: Warranty And Compliances - Optelec multiview HD Manuel D'utilisation

Optelec MultiView HD

Appendix C: Warranty and compliances

Warranty
Optelec warrants the MultiView HD, effective from the date of delivery, to be
free of any defects in material and workmanship.
Warranty is not transferable and does not apply to groups or multi users.
The MultiView HD has been designed for the individual purchaser and to be
used in a home or office environment. Optelec reserves the right to repair or
replace any purchased MultiView HD with a similar or superior product.
In no event shall Optelec or any of its distributors be held liable for any
indirect or consequential damages. This warranty is valid only when
serviced in the original country of purchase and if seals are intact. For
additional warranty claims or for service during or after warranty period,
please contact your distributor.
Optelec takes no responsibility for any other use of this device than the use
described in this manual.
Compliances
This product complies with the safety and EMC requirements, which fall
under the following directives:
Safety
EN 60950-1
EMC
EN 55022
EN 55024
FCC
FCC part 15 Class B
WARNING: The use of accessories, transducers and cables other than
those specified and sold by the manufacturer of the MultiView HD as
replacement parts for components, may result in increased emissions or
decreased immunity of the MultiView HD.
This device bears the CE and FCC approval mark.
English 19