Camera Positions - Optelec multiview HD Manuel D'utilisation

Optelec MultiView HD
At a horizontal axis, the camera head can be tilted 270 degrees. Tilt the
camera head and rotate it to view objects further away such as a
whiteboard. The following figure shows the different tilt movements.
270 degrees tilt
Note: Do not force the camera head beyond its limit as this could
permanently damage the rotation axis feature.
The camera arm can be moved from left to right, and from right to left, by
using the slider located at the back of the base stand. The following figure
shows the slider.

Camera positions

The MultiView HD automatically returns to its original settings when the
camera is switched from close-up to distance viewing and vice-versa. For
example, when the camera is tilted quickly from the whiteboard you are
viewing to the top of your desk, your preferred viewing mode and
magnification settings will automatically be applied. Three setting options
can be stored: close-up viewing, self-viewing and distance viewing.
English 11