Buckling / Unbuckling Of The Baby - KIDDY Evolution Pro 2 Manuel D'utilisation

EN
position upward or downward (fig. 6, no. 3). The shoulder belts have
to be adjusted so that they are at the baby's shoulder height (fig. 7).
Lock the handles back into place after you have finished. Please make
sure that the belt system is not twisted or does not become lodged!
Close the front cover.

6.3 Buckling / Unbuckling of the baby

Always buckle up your child when it is in the infant carrier! Loosen the
shoulder belts as described in point 6.1 and place them over the side
of the rim of the carrier.
Place your baby in the infant carrier and then position the shoul-
der belts over its shoulders (fig. 8, no. 1). Place the safety belt lock
tongues attached to the shoulder belts over each other (fig. 8, no. 2).
Now push the safety belt lock tongues into the buckle. It is locked in
place when a click sound is heard (fig. 9). Make certain that it is se-
curely locked in place! Now pull the central belt until the belt system
fits the body of the child snugly (fig. 10)!
Make sure that the space between the belts and your child is no more
than the width of a finger (approx. 1 cm) and that the belt system is
not twisted.
Loosen the shoulder belts as described in point 6.1 and press the red
button on the buckle to unbuckle your baby. Now you can take the
child out of the seat.
12