Removing The Headrest Cover; Removing The Seat Cover; Removing The Cover Of The Leg Extension; Impact Shield Cover - KIDDY Phoenixfix 3 Guide D'utilisation

Masquer les pouces Voir aussi pour Phoenixfix 3:

Table des Matières

Les langues disponibles

Then open the hook and loop fasteners on the rear side of the shoulder

supports (G) and pull the cover towards the front off the seat.

9.2 Removing the headrest cover

First put the headrest (F) into the highest position.

Then open the hook and loop fasteners on the rear side of the cover.

Now carefully remove the cover from the height adjustment handle (P) and pull

it forward over the headrest (F).

First open the press studs on the underside and rear side of the seat (E) and on

the two straps on the back of the cover.

Now disengage the left and right hook and loop fasteners under the cover and

pull the cover up and off.

First pull the leg extension (J) into the most forward position.

Then detach the cover from the hook on the underside of the leg extension (J).

Now carefully pull the cover over the edge of the leg extension (J) in an upwards

motion.

The impact shield cover may not be removed or washed.

Table des Matières

Table des Matières